Detailed Product Description

This kind of copper clad aluminum wire is produced with the production process of Cladding Welding Drawing method, by cladding planished copper belt concentrically on the outer surface of the aluminium line, via several times of drawing and heat treatment, to meet customers' technical requirement on line diameter, mechanics and electrics capacity.

 There forms a firm atom metallurgy combination between the copper layer and the aluminum core. Its surface is bright and smooth without any default.

This kind of wire is featured of both the samll density of aluminum and the good conductivity of copper. It is used as the conductor in coaxial cables. It not only has high signal transmission property, but also has characteristics such as low weight and low production cost.

 There are two types of CCA wire in our company,10% and 15%;here the 10% means the rate of copper layer to the whole volume of CCA wire is about from 8% to 12%,we mark it as 10%(be short for 10);and 15% means the rate of copper layer to the whole volume of CCA wire is about from 13% to 17%,we mark it as 15%(be short for 15).

  And according to the staes of the flexibility of the wire,it can be divided into Soft and Hard,here we use "A" stands for Soft,and "H" for Hard.In this way,we can totaly say that we have 4 types of wire in our company,they are 10A,10H,15A,15H.At the same time,each of them have different diameter of line,the diameter are as follows:

Diameter:

0.08mm

0.10~0.11mm

0.12~0.13mm

0.14~0.15mm

0.16~0.18mm

0.19~0.20mm

0.21~0.22mm

0.25~0.28mm

0.30~0.35mm

0.38~0.45mm

0.50~0.80mm

1.10~1.80mm

2.05~5.30mm

Of course we can produce as clients' specification.

So,for example,if you want Φ2.05mm  Soft CCA wire,and the Copper Layer Volume Rate as 15%,the way to describe that is: CCA-15A-2.05.

We warmly welcome your all kinds of enquiry!